Sold Out

MT2 Mill Drill for Crush Grind Mechanism

R670.00

The Mill Drill was designed to make the production of the salt and pepper grinders easier and quicker.

The Mill Drill will accurately cut the first two holes (45mm and 38mm) at the correct depths for the fitting of a mechanism, after the cutters have been set.

Setting the cutters is a simple process. All that is needed is the Allen key provided and either a set of vernier calipers or an accurate rule. It incorporates a No 2 morse taper, so it will fit into the tailstocks of most lathes which means the drilling process can be done on the lathe.

In drilling the 45mm hole to the correct depth, the 38mm hole will also be at the correct depth.

The Mill Drill has been designed in such a way as to ensure the difference in the depths of the two holes is according to the dimensions of the CrushGrind® mechanism. There is a line engraved on the shaft 20mm behind the back cutter, to show when the correct depth has been achieved

The Mill Drill has the added feature of being able to act as a chuck for drill bits with a 10mm shank. Many forstner bits have reduced shanks that measure 10mm and these can be inserted into the front of the Mill Drill with the front cutter removed.

  • Model: MT2 Mill Drill for Crush Grind Mechanism
  • Shipping Weight: 375grams
  • 0 Units in Stock


This product was added to our catalog on Friday 24 March 2017.

Copyright © 2017 Mr Woodturner